One thing I WILL say is the track is very similar in construction to the AFV Club individual tracks I used for my M728 CEV (with the exception of the vinyl end connectors) and I would STRONGLY advise not to use
white spirit/enamel thinners during the weathering stage as this made the track link end connecting pins very brittle and the tracks just fell apart. The AFV Club end connectors were styrene and they split too but the vinyl ones in this kit should fare better (hopefully). Either way I'll use IPA (IsoPropyl Alcohol) when applying weathering powders to the tracks.
Hot off the bench we have a complete run of track for one side;
OK the way to do it is this;
(1) Unlike what I said above assemble the guide horns and links as per instructions (and in the top picture) however don't stop at five links, just carry on for at least twenty or thirty.
(2) Cut off the connecting sprue between the guide horns using a block to support the links (I used a wooden clothes peg).
(3) Lay the links flat on the bench and press the vinyl end connectors onto the pins four or five at a time (taking note which way up they go).
(4) Cut the vinyl end connectors from the sprue and there you have it. Job done! No need for the supplied assembly jig either.
Meng recommend 81 links in the instructions which is what I've done and it does'nt seem to be pulling the sprocket and idler in odd directions (which can happen sometimes).
Time-wise I reckon it has taken me about four or five hours from removing and cleaning up the links from the sprue to final assembly, also the way they go together means I can paint them seperately and feed them through behind the side skirts when the model is finished.